ET0320
- Pitch
32 mm - Height
18 mm - Width
15 – 65 mm - Bending
radius
28 – 100 mm
Stay variants
Design 030
Frame with lamella crossbars in the outer radius
- Weight-optimized plastic frame with particularly high torsional rigidity.
- Swivable on one side in any position.
Opening options
outside: Swivable.
Design 040
Frame with lamella crossbars in the inner radius
- Weight-optimized plastic frame with particularly high torsional rigidity.
- Swivable on one side in any position.
Opening options
inside: Swivable.
Unsupported arrangement
| Dynamics of unsupported arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 10 | 50 | 32 |
Installation dimensions unsupported
| KR [mm] |
H [mm] |
Hz [mm] |
LB [mm] |
UB [mm] |
| 28 | 81.5 | 101.5 | 152 | 73 |
| 38 | 101.5 | 121.5 | 184 | 83 |
| 48 | 121.5 | 141.5 | 215 | 93 |
| 75 | 175.5 | 195.5 | 300 | 120 |
| 100 | 225.5 | 245.5 | 379 | 145 |
Load diagram
for unsupported length depending on additional load
- Intrinsic cable carrier weight qk = 0.40 kg/m with Bi 38 mm. For other inner widths the maximum additional load changes.
- Fixed point offset Lv: For off-center fixed point connections please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
- Unsupported length Lf: Lf = LS/2 + t
Gliding arrangement
| Dynamics of gliding arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 2.5 | 25 | 32 |
- Glide shoes are required for gliding applications.
- For more information on gliding arrangement please contact us.
- The gliding cable carrier has to be routed in a channel. Our engineers will be happy to help with project planning – please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
End Connectors
One part end connectors – plastic (with integrated strain relief)
The plastic end connectors can be connected from above and below. The connection type can be changed by reconnecting the end connector.
| Bi [mm] |
BEF [mm] |
nz |
| 15 | 27 | 2 |
| 25 | 37 | 3 |
| 38 | 50 | 4 |
| 50 | 62 | 5 |
| 65 | 77 | 6 |
- The end connectors cannot be swiveled.
The connecting elements are also available as an option without integrated strain relief. Please state when ordering.
Connection variants
Connection point
F – fixed point
M – driver
Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint outside rotated by 90°
K – threaded joint inside rotated by 90°
Subject to change.
