ET1455.030

Stay variant 030 – with lamella crossbars in the outner radius

  • Weight-optimized plastic frame with particularly high torsional rigidity.
  • Swivable slats on one side in any position.
  • Opening options
    outside: Swivable.
ET1455.030
  • Stay arrangement on every chain link
    (VS)
  • Bi from 78 mm
Grafik Kettenbreite
  • The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier width

  • Outer width Bk: Bk = Bi + 16 mm
  • Total width BEF': BEF' = Bi + 19 mm

Pitch, inner height and chain link height

t
[mm]		 hi
[mm]		 hG
[mm]		 hG'
[mm]
45.5 25 36 38.5

Bend radii

KR [mm]
52 65 95 125 150 180 200

Inner/outer width and intrinsic cable carrier weight

Bi
[mm]		 Bk
[mm]		 BEF
[mm]		 qk
[kg/m]
78 94 97 0.8

Divider systems

Divider systems

Movable divider
Version A (Standard)

As standard, the divider system is assembled at each 2nd chain link.

As standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider systems

Fixable divider (2.5 mm grid)
Version B

The dividers are easily attached to the stay for applications with transverse acceleration and for laterally recumbent applications by simply turning them.

The locking cams click into place in the locking grids in the crossbars (version B).

Divider system TS0 without height separation

Divider system
Version A Version B
ST
[mm]		 Wf
[mm]		 aTL/aTR min
[mm]		 ax min
[mm]		 ac min
[mm]		 aTL/aTR min
[mm]		 ax min
[mm]		 ac min
[mm]		 ax Raster
[mm]
2 7 3.5 7 5 4 7.5 5.5 2.5
  • Chamber width ac: ac = ax – ST

Subject to change.