UA1665

  • Pitch
    66.5 mm
  • Height
    44 mm
  • Width
    50 – 250 mm
  • Bending
    radius
    75 – 300 mm

Stay variants

Design 020

Closed frame

  • Weight-optimized, closed plastic frame with particularly high torsional rigidity.

Opening options
inside/outside: Cannot be opened.

more information

Stay variant

Design 030

Frame with externally detachable crossbars

  • Weight-optimized plastic frame with particularly high torsional rigidity.
  • Swivable and detachable left or right in any position.

Opening options
outside: Swivable and detachable.

more information

Stay variant

Design 040

Frame with internally detachable crossbars

  • Weight-optimized plastic frame with particularly high torsional rigidity.
  • Swivable and detachable left or right in any position.

Opening options
inside: Swivable and detachable.

more information

Stay variant

Design RMA

Mounting frame stay

  • Weight-optimized plastic frame with particularly high torsional rigidity.
  • Plastic crossbars and aluminum profile bars with plastic mounting frame stays for guiding very large cable diameters.

Opening options
outside or inside: Screw connection of the aluminum profile bars is easy to release.

more information

Stay variant

Unsupported arrangement

Unsupported arrangement
Dynamics of unsupported arrangement t
[mm]
vmax [m/s] amax [m/s2]
8 40 66.5

Installation dimensions unsupported

KR
[mm]		 H
[mm]		 Hz
[mm]		 LB
[mm]		 UB
[mm]
75 210 245 369 172
100 260 295 448 197
120 300 335 511 217
140 340 375 574 237
200 460 495 762 297
250 560 595 919 347
300 660 695 1,076 397

Load diagram

for unsupported length depending on additional load

Load diagram
  • Intrinsic cable carrier weight qk = 2.43 kg/m with Bi 200 mm. For other inner widths the maximum additional load changes.
  • Fixed point offset Lv: For off-center fixed point connections please contact us.

Calculating the cable carrier length

  • Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
  • Unsupported length Lf: Lf = LS/2 + t

Gliding arrangement

Gliding arrangement
Dynamics of gliding arrangement t
[mm]
vmax [m/s] amax [m/s2]
3 15 66.5
  • Only designs 020, 030 and RMA may be used for gliding arrangements.
  • For more information on gliding arrangement please contact us.

Installation dimensions gliding with RKR links

KR
[mm]		 H
[mm]		 nRKR LB
[mm]		 UB
[mm]
75 180 2 694 333
100 180 2 881 405
120 180 3 1,038 464
140 180 3 1,197 523
200 180 4 1,684 701
250 180 6 2,094 850
300 180 7 2,506 1,000
  • Connection height H is standard. Please contact us if you require other connection heights H. We will be happy to advise you. Optionally, the OnlineEngineer is always available for the calculation.
  • The gliding cable carrier has to be routed in a channel. Our engineers will be happy to help with project planning – please contact us.
  • Fixed point offset Lv: For off-center fixed point connections please contact us.

Calculating the cable carrier length

  • Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)

End connectors

Universal end connectors UMB – plastic (standard)

The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom, or face on.

Universal end connectors UMB – plastic (standard)
Bi
[mm]		 BEF
[mm]		 nz
50 74 2 x 3
75 99 2 x 5
100 124 2 x 7
125 149 2 x 9
150 174 2 x 11
175 199 2 x 13
  • Recommended tightening torque:
    5 Nm for screws M5 - 8.8
End connector

The end connectors are optionally also available without strain relief comb or with C-rail (1 per side) for clamps. Please state when ordering.

Connection variants

Connection variants

Connection point
F – fixed point
M – driver

Connection type
U – universal mounting bracket

  • The universal end connectors UMB can be swiveled in KR direction.

One part end connectors – plastic

The plastic end connectors can be connected from above and below. The connection type can be changed by reconnecting the end connector.

One part end connectors – plastic
Bi
[mm]		 BEF
[mm]		 nz
50 72 2 x 4
75 97 2 x 6
100 122 2 x 8
125 147 2 x 10
150 172 2 x 12
175 197 2 x 14
200 222 2 x 16
225 247 2 x 18
250 272 2 x 20
  • Recommended tightening torque:
    15 Nm for screws M8 - 8.8
End connector

The end connectors are also available as an option without strain relief comb. Please state when ordering.

Connection variants

Connection variants

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint outside rotated by 90°
K – threaded joint inside rotated by 90°

Universal end connectors UMB-St – steel

The universal mounting brackets (UMB) are made from steel and can be mounted from the top, from the bottom or face on.

Universal end connectors UMB-St – steel
Bi
[mm]		 BEF
[mm]
50 94
75 119
100 144
125 169
150 194
175 219
200 244
225 269
250 294

The end connectors are also available as an option with C-rail for clamps. Please state when ordering.

Connection variants

Connection variants

Connection point
F – fixed point
M – driver

Connection type
U – universal mounting bracket

  • Note: The end connectors UMB-St offer the same connection dimensions as the previous universal end connectors UMB from UNIFLEX 0665.

Subject to change.