TKA38
- Pitch
38.5 mm - Height
26 mm - Width
25 – 130 mm - Bending
radius
70 – 230 mm
Stay variants
Design 060
With inside detachable cover on both sides
- Plastic cover for rough environmental conditions with dirt, chips or spray water.
- Fully detachable on one side in any position.
Opening options
inside: Very quick release.
Design 080
With outside detachable cover on both sides
- Plastic cover for rough environmental conditions with dirt, chips or spray water.
- Fully detachable on one side in any position.
Opening options
outside: Very quick release.
Unsupported arrangement
| Dynamics of unsupported arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 10 | 50 | 38.5 |
Installation dimensions unsupported
| KR [mm] |
H [mm] |
Hz [mm] |
LB [mm] |
UB [mm] |
| 70 | 176 | 201 | 297 | 127 |
| 95 | 226 | 251 | 375 | 152 |
| 120 | 276 | 301 | 454 | 177 |
| 145 | 326 | 351 | 532 | 202 |
| 170 | 376 | 401 | 611 | 227 |
| 195 | 426 | 451 | 689 | 525 |
| 230 | 496 | 521 | 799 | 287 |
Load diagram
for unsupported length depending on additional load
- Intrinsic cable carrier weight qk = 1.13 kg/m with Bi 78 mm. For other inner widths the maximum additional load changes.
- Fixed point offset Lv: For off-center fixed point connections please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
- Unsupported length Lf: Lf = LS/2 + t
Gliding arrangement
| Dynamics of gliding arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 2.5 | 20 | 38.5 |
- For more information on gliding arrangement please contact us.
- The gliding cable carrier has to be routed in a channel. Our engineers will be happy to help with project planning – please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
End connectors
Universal end connectors UMB – plastic (standard)
The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom, or face on.
| Bi [mm] |
BEF [mm] |
nz |
| 25 | 43 | 2 |
| 38 | 56 | 3 |
| 58 | 76 | 5 |
| 78 | 96 | 7 |
| 103 | 121 | 9 |
| 130 | 148 | 13 |
- Recommended tightening torque:
3 Nm for cheese-head screws ISO 4762 - M4 × 20
The end connectors are also available as an option without cover sheet. Please state when ordering.
Connection variants
Connection point
F – fixed point
M – driver
Connection type
U – universal mounting bracket
- The universal end connectors UMB can be swiveled in KR direction (alpha/beta).
Subject to change.
