TKA45
- Pitch
45.5 mm - Height
36 mm - Width
50 – 150 mm - Bending
radius
82 – 230 mm
Stay variants
Design 060
With inside detachable cover on both sides
- Plastic cover for rough environmental conditions with dirt, chips or spray water.
- Fully detachable on one side in any position.
Opening options
inside: Very quick release.
Design 080
With outside detachable cover on both sides
- Plastic cover for rough environmental conditions with dirt, chips or spray water.
- Fully detachable on one side in any position.
Opening options
outside: Very quick release.
Unsupported arrangement
| Dynamics of unsupported arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 9 | 45 | 45.5 |
Installation dimensions unsupported
| KR [mm] |
H [mm] |
Hz [mm] |
LB [mm] |
UB [mm] |
| 82 | 214 | 249 | 348 | 153 |
| 95 | 240 | 275 | 389 | 166 |
| 125 | 300 | 335 | 483 | 196 |
| 145 | 340 | 375 | 546 | 216 |
| 170 | 390 | 425 | 625 | 241 |
| 200 | 450 | 485 | 719 | 271 |
| 230 | 520 | 555 | 814 | 301 |
Load diagram
for unsupported length depending on additional load
- Intrinsic cable carrier weight qk = 2.29 kg/m with Bi 150 mm. For other inner widths the maximum additional load changes.
- Fixed point offset Lv: For off-center fixed point connections please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
- Unsupported length Lf: Lf = LS/2 + t
Gliding arrangement
| Dynamics of gliding arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 3 | 20 | 45.5 |
- For more information on gliding arrangement please contact us.
- The gliding cable carrier has to be routed in a channel. Our engineers will be happy to help with project planning – please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
End connectors
Universal end connectors UMB – plastic (standard)
The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom, or face on.
| Bi [mm] |
BEF [mm] |
nz |
| 50 | 70 | 2 x 3 |
| 75 | 95 | 2 x 5 |
| 100 | 120 | 2 x 7 |
| 125 | 145 | 2 x 9 |
| 150 | 170 | 2 x 11 |
- Recommended tightening torque:
5 Nm for cheese-head screws ISO 4762 - M5 - 8.8
The end connectors are also available as an option without cover sheet. Please state when ordering.
Connection variants
Connection point
F – fixed point
M – driver
Connection type
U – universal mounting bracket
- The universal end connectors UMB can be swiveled in KR direction (alpha/beta).
Subject to change.
