TKA55
- Pitch
55.5 mm - Height
45 mm - Width
50 – 250 mm - Bending
radius
100 – 300 mm
Stay variants
Design 060
Covered on both sides with inside detachable cover
- Plastic cover for rough environmental conditions with dirt, chips or spray water.
- Fully detachable on one side in any position.
Opening options
inside: Very quick release.
Design 080
Covered on both sides with outside detachable cover
- Plastic cover for rough environmental conditions with dirt, chips or spray water.
- Fully detachable on one side in any position.
Opening options
outside: Very quick release.
Unsupported arrangement
| Dynamics of unsupported arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 8 | 40 | 55.5 |
Installation dimensions unsupported
| KR [mm] |
H [mm] |
Hz [mm] |
LB [mm] |
UB [mm] |
| 100 | 264 | 304 | 425 | 188 |
| 120 | 304 | 344 | 488 | 208 |
| 140 | 344 | 384 | 551 | 228 |
| 170 | 414 | 454 | 645 | 258 |
| 195 | 454 | 494 | 725 | 283 |
| 225 | 514 | 554 | 818 | 313 |
| 250 | 564 | 604 | 896 | 338 |
| 300 | 664 | 704 | 1,211 | 388 |
Load diagram
for unsupported length depending on additional load
- Intrinsic cable carrier weight qk = 1.95 kg/m with Bi 50 mm. For other inner widths the maximum additional load changes.
- Fixed point offset Lv: For off-center fixed point connections please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
- Unsupported length Lf: Lf = LS/2 + t
Gliding arrangement
| Dynamics of gliding arrangement | t [mm] |
|
| vmax [m/s] | amax [m/s2] | |
| 3 | 15 | 55.5 |
- For more information on gliding arrangement please contact us.
- The gliding cable carrier has to be routed in a channel. Our engineers will be happy to help with project planning – please contact us.
Calculating the cable carrier length
- Cable carrier length Lk: Lk ≈ LS/2 + LB (Cable carrier length Lk rounded to pitch t)
End connectors
Universal end connectors UMB – plastic (standard)
The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom, or face on.
| Bi [mm] |
BEF [mm] |
nz |
| 50 | 74 | 2 x 3 |
| 75 | 99 | 2 x 5 |
| 100 | 124 | 2 x 7 |
| 125 | 149 | 2 x 9 |
| 150 | 174 | 2 x 11 |
| 175 | 199 | 2 x 13 |
| 200 | 224 | – |
| 225 | 249 | – |
| 250 | 274 | – |
- Recommended tightening torque:
5 Nm for cheese-head screws ISO 4762 - M5 - 8.8
The end connectors are also available as an option without cover sheet. Please state when ordering.
Connection variants
Connection point
F – fixed point
M – driver
Connection type
U – universal mounting bracket
- The universal end connectors UMB can be swiveled in KR direction (alpha/beta).
Subject to change.
